E6000 vs Contact Cement

It’s difficult to decide when picking up any glue between e6000 and contact cement because of a lack of knowledge. Choosing the right cement for this type of application is made easier by the E6000 vs Contact Cement comparison.

Article Highlights

  • E6000 has robust industrial strength with a clear look when dried, better durability in adverse weather, less setting time, and less toxicity.
  • With strong adhesion, the contact cement is preferable as more toxic glue with lesser resistance to adverse impacts and takes more time to dry, having a tan-colored look.
  • Comparing both glues, one is superior overall, and the other is eventually better in some particular applications.

E6000 and contact cement are renowned glues in today’s market. Also, both glues are excellent in their performances.

However, each glue has some unique features for specific applications. Following this article, you can easily determine the better glue for your task.

Learn More: Gem-Tac vs E6000

E6000 vs Contact Cement

PropertiesE6000Contact Cement
MaterialsTetrachloroethylene and Butadiene CopolymerSynthetic Rubbers & Resins
Temperature Withstand-40 to 93 ºC-40°C to 82°C
Solids30% by Weight20% by Weight
Drying Time2 minutes20 minutes
Curing Time24 hours72 hours

Overview of E6000

E6000 is a gel-formed clear glue composed of tetrachloroethylene and butadiene copolymer.

This glue has strong adhesion to any surface, like glass, metal, wood, fiberglass, masonry, concrete, vinyl, rubber, leather, etc.

E6000 is a self-leveling glue that generates cross-linking bonds that create a strong bond with the surface. 

E6000 is mainly used for various DIY and hardware-related jobs like cell phone repairs, jewelry making, toy fixing, shoe repairing, sealing, attaching, and patching surfaces.

Besides that, this glue has strong resistance to water, temperatures between -40 to 93°C, UV exposure, flame, chemical, and abrasion.

E6000 Glue

It takes 2 minutes to get tacky and 24 hours for complete curing. Following that, the glue stays flexible and bendable. 

E6000 glue comes in tubes with a narrow nozzle that allows the user to dispense preciously, even if the surface is too small.

Therefore, installing different-sized gems or rhinestones gets easy with less skill. Also, the airtight caps seal the gap on the nozzle to prevent air contact with solvent.

Which makes the product usable multiple times. All is needed to keep the surface clean while applying the glue. The glue also comes in a gallon. 

Overview of Contact Cement

This tan-colored glue is manufactured with synthetic rubbers & resins. The glue is eligible to generate bonds with porous or non-porous surfaces. 

By spreading easily, the glue can be used on wood, plastic, leather, fabrics, rubber, paper, cardboard, particle board, plywood, concrete, and metal.

Specifically, this glue is unbeatable at Formica attaching, and sticking wooden board, and plywood on different surfaces.

The polymeric glue delivers strong bonds with the surface, which gets better with time. Besides that, the glue has adequate durability against environmental impacts like water and heat between -40°C to 82°C. 

Using the glue is very easy. Ensure the required surface is clean and have safety precautions like gloves and glasses before applying glue. 

By using a brush, the glue can be distributed uniformly. Apply the glue on both surfaces which are about to be attached. 

For a non-porous surface, apply sandstone paper to rough the surface. 

Contact Cement

Then, wait for the glue to dry for 20 minutes till it gets tacky. This drying time can vary due to temperature and humidity.

When it gets tacky, make sure by simply touching the dried glue, then attach it to the surface you need. 

The glue can be used for coating any surface. Therefore, apply two layers after the first layer is dried.

Contact cement is basically water-based. That’s why it is not recommended for metal to glass attachments.

It takes 72 hours to complete the cure.

Which One is Better? E6000 or Contact Cement?

If you are about to select a glue better enough for high-strength bonding stuff, both are sufficient for you.

But this fact changes when it’s about durability and accessibility. 

When durability is the main priority, then undoubtedly go for e6000 as it offers better durability against moisture, heat, UV, chemical, flame, and abrasion.

Following curing time, the e6000 is also ahead of the contact cement. As the e6000 takes 2 minutes to get tacky, and contact cement takes 20 minutes.

Again, if you are sensitive to toxicity, odor, or fume from the glue, then e6000 is a better option.

The e6000 is again better than the contact cement for precision and tasks with smaller items.

Editor’s Opinion

Both e6000 and contact cement are excellent in service.

Last but not least, both glues have different colors after curing. E6000 is clear, and contact cement is tan in color when dried. 

When it’s about legibility, then definitely go for the e6000. Also, it’s about a quick adhesion to complete your project in a short time.

Again, if the toxicity and odor are an issue for you, e6000 is the best solution between these two.

Overall, it shows that e6000 is a better option than contact cement.

Jack Thompson

Jack Thompson

Articles: 16

Leave a Reply

Your email address will not be published. Required fields are marked *